url to firmware: http://inbox.eu.org/download/

to upload software you have to installed tftp client on computer conneted to
LAN1. you have to change IP number to 192.168.1.1/255.255.255.0
next turn off your AP. press reset button and having pressed reset button turn
on AP. after few second status led turn of. then go to your computer and
upload firmware in binary mode to 192.168.1.6. after few second AP will reboot.
you have to wait that AP will start change state od leds on front panel. 

In one moment all 4 LEDS (status, mac, wep adn bri) will flash - this is a
signal that ssh have started. Now you can login to the AP.

login root
pass  root (changed 21.05.2006)

config is stored in /etc/runtime

after change config you have to store it in flash by command: "wrunt"
you can restore saved config from flash by running "rrunt"

default config is: AP runned in AP mode, essid: rtl8186
 eth0 to 192.168.1.254/24
 eth1 to 192.168.100.252/24
 wlan0 to 192.168.2.254/24

DHCP not runned - you have to configure it manualy ... 
there is no web based managment. but web browser is included but not
configured.

You can put your own files in /usr/local and store it on the flash using
"wlocal" and restore it using "rlocal".

any things not working now ... i'm working on it ... 
if you have any suggestion write to me ... 

with regards.
--
maxilee
max@inbox.eu.org